Enfee Stucco Masking Tape is a UV resistant polyethylene  tape used to temporarily mask surfaces during stucco application and painting.These tapes are often applied directly to window and door frames and sometimes used in conjunction with short term window protection films for added masking protection. It has a special synthetic high-tack adhesive which provides a watertight seal in severe environments and weather conditions and offers clean removal. Typical applications include masking window and door frames during stucco application as well as masking on gypsum board, wood, metal, Masonry, vinyl, stucco, and tile during painting to form an air and vapor barrier in the EIFS/Stucco system,protect from damage, dust, debris, and over spray. Also used for greenhouse repair (the tape provides for limited UV exposure).

This product's actual size is 48mm x 55m.

 

Advantages:

1. stick securely, clean removal.

2. hand tear-able, tear easily for fast and efficient preparation for buildings before the stucco application starts.

3. Bright red color makes it easily distinguish from Masking, Painters, Electrical, and Duct Tapes. 

4. Offering excellent aging characteristics-weather and UV resistant for 234days.

 

Technical Information

Core: 3 inch diameter

Backing/Carrier: polyethylene film

Adhesive: synthetic rubber

Thickness (carrier, adhesive):5.5mil 7mil, 7.5mil, 

Adhesion: 80 ounces per inch (to stainless steel test panel) /12 lb/in

Tensile Strength: 19 pounds per inch (longitudinal) 

Service/Operating Temperature: 32F to 160F

Elongation: 450 %

Water Vapor Transmission Rate: 0.4 gm/100 sq in/24 hr